Single-axis weed brush Weedo II
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
DE
Pos: 78 / Instructions / 7 Operation / Kersten / Weedo II / 7.3a Horizont. Aligning the weed brush (right-hand / left-hand traffic) @ 15 \ mod_1548686877801_6.docx @ 255954 @ 2 @ 1
7.12Align the weed brush horizontally
Fig.: Align the weed brush horizontally
1
Lifting handle
2nd Working head
The weed brush can be aligned horizontally at five positions relative to the axis of
the carrier vehicle.
The following steps must be carried out:
1.
Loosen the bolt connection by lifting and holding the lifting handle (1).
2nd. Swiveling the vehicle around the horizontal axis until the weed brush is at
the desired position.
Alternatively: weed brush aHold the swivel head (2) and swivel it.
3rd. Let go of the lifting handle (1) so that the pin engages in a grid perforation on
the axis.
In this way, the uniaxial weed brush can be switched to left-hand traffic, for
example. Corresponding setting recommendations are in the chapter7.10
Requirements for optimal weed removal on page given.
2019-03-01
56 / 79
Содержание Weedo II
Страница 2: ...DE 2019 03 01 2 79...
