Single-axis weed brush Weedo II
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
DE
•
Private and commercial operators
Protective gear:
•
jobprotective clothing
•
Protective gloves
•
safety goggles
•
Fan housing after every 100 operating hours or mind. Remove once a year -
preferably before the season - and clean the cooling fins on the cylinder and
cylinder head as well as the baffles necessary for air circulation, the cooling
air strainer and the oil cooler.
•
Hydraulic oil change and hydraulic oil filter change for the first time after 20
operating hours, then every 100 operating hours. Change the hydraulic oil
filter at the same time interval as changing the hydraulic oil. (For the type of
oil used, see chapter11 Technical data single-axis weed brush Weedo II on
page ).
•
Clean the spark plug from soot deposits with a wire brush and then check
the electrode gap. The distance between the electrodes should be approx. 1
mm. Replace spark plug after 200 hours of operation.
•
Air filter after 100 bet at the latestclean rubbing hours. Clean after a few
hours in very dusty conditions.
Item: 96 / Instructions / 9 Maintenance / Kersten / Weedo II / 9.4.7 Changing brush elements @ 14 \ mod_1548254811231_6.docx @ 253649 @ 3 @ 1
8.3.5 Changing brush elements
Staff:
•
Instructed specialist staff
Protective gear:
•
Protective clothing
•
Protective gloves
•
safety goggles
2019-03-01
67 / 79
DANGER
Danger to life or injury from a machine in operation!
A machine that is in operation poses a risk of death or injury as well as property
damage to the machine
•
Before changing the brush elements, the machine must be disconnected
from the power supply and secured against being switched on again.
Содержание Weedo II
Страница 2: ...DE 2019 03 01 2 79...
