Single-axis weed brush Weedo II
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
DE
Item: 76 / Instructions / 7 Operation / Kersten / Weedo II / 7.11 Recommendations for optimal weed removal / left-hand traffic @ 15 \ mod_1550829385490_6.docx @ 259750 @ 2 @ 1
7.10Requirements for optimal weed removal
Recommended settings and conversion to left-hand traffic
The setting of the uniaxial weed brush significantly influences the success of the
work. The uniaxial weed brush can be adjusted by the following measures:
•
Adjustmentthe working height (degree of wear of the tool set)
•
Adjusting the height of the splash guard on the weed brush (Terrain,
inclination of the brush plate)
•
Horizontal alignment of the weed brush (right-hand / left-hand traffic)
•
Changing the direction of rotation of the weed brush (right-hand / left-hand
traffic)
•
Swiveling around the transverse and longitudinal axes of the weed brush,
contact point with the ground (right / left traffic, strength of weed growth)
•
Positioning the splash guard on the weed brush (Right-hand / left-hand
traffic)
The steps for setting the uniaxial weed brush are described below from the chapter
7.11 Set working height on page described in detail.
Fig.: Weed brush with splash guard for right-hand traffic (left) and left-hand traffic
Right-hand traffic settings (seeFig. 18, Left):
-
Align the weed brush horizontally right-justified.
-
Set the direction of rotation clockwise.
-
Ideally, set the contact point by swiveling around the transverse and
longitudinal axes in the direction of travel between 2 and 5 a.m. (setting
between 12 and 2 a.m. satisfactory but not ideal).
-
Position the splash guard in the level on the left.
Left-hand traffic settings (see Fig. 18, right):
2019-03-01
53 / 79
Содержание Weedo II
Страница 2: ...DE 2019 03 01 2 79...