Kersten Weedo II Скачать руководство пользователя

Страница: 68 / 79

Single-axis weed brush Weedo II

Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.

Fig.: Brush elements

Clamping screw

2nd

Brush element

A   brush   element   (2)   is   replaced   by   loosening   the   clamping   screw   (1)   that   fixes   the
brush   element   (2)   in   the   brush   holder.   The   brush   element   (2)   can   then   be   removed
and   replaced.

Item: 97 / Instructions / 9 Maintenance / Kersten / Weedo II / 9.4.8 Changing the brush plate @ 14 \ mod_1548254811747_6.docx @ 253671 @ 3 @ 1

8.3.6 Change the brush plate

Staff:

•

Instructed specialist staff

Protective gear:

•

Protective clothing

•

Protective gloves

•

safety goggles

2019-03-01

68 / 79

DANGER

Danger to life or injury from a machine in operation!

A machine that is in operation poses a risk of death or injury, as well as damage
to the machine.

•

Before changing the brush plate, the machine must be disconnected from
the power supply and secured against being switched on again.

Содержание Weedo II
















































































Результаты поиска

Содержание Weedo II

Отзывы:

Похожие инструкции для Weedo II

Бренды по названию

Популярные бренды

Kersten Weedo II, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание Weedo II

Отзывы:

Похожие инструкции для Weedo II

Бренды по названию

Популярные бренды