Single-axis weed brush Weedo II
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
DE
7.15Swing the weed brush around the longitudinal axis
Fig.: Swing the weed brush around the longitudinal axis
1
Clamping lever
2nd Bolt handle
3rd
Working head
The angle of inclination of the brush plate transverse to the direction of travel can
be determined at seven latching positions arranged in an arc.
The adjustment is made as follows:
1.
Turn the clamping lever (1) slightly counterclockwise.
2nd. Loosen the locking bolt by pulling out and holding the bolt handle (2).
3rd. Swivel the working head (3) until the desired angle of inclination is reached.
The brush plate moves around the longitudinal axis.
4th. Release the bolt handle (2) so that the bolt engages in a hole.
5.
Tighten the clamping lever (1) clockwise.
By swiveling the weed brush around the transverse axis (see chapter 7.14 Swing
the weed brush around the transverse axis on page ) and the longitudinal axis, the
contact point of the weed brush with the ground can be set. The uniaxial weed
brush can thus be switched to driving on the left. Corresponding setting
recommendations are in the chapter7.10 Requirements for optimal weed removal
on page given.
Item: 82 / Instructions / 7 Operation / Kersten / Weedo II / 7.6 Setting the splash guard height @ 14 \ mod_1548253871306_6.docx @ 253560 @ 2 @ 1
2019-03-01
59 / 79
Содержание Weedo II
Страница 2: ...DE 2019 03 01 2 79...