Single-axis weed brush Weedo II
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
DE
2019-03-01
34 / 79
WARNING
Risk of injury / risk of environmental damage due to insufficient / faulty
maintenance!
A lack of maintenance creates the risk of injury and damage to the machine and
the environment and property.
•
maintenance and cleaning work should only be carried out with the
combustion engine stopped and the fuel tap closed.
•
Always remove the spark plug connector when working on the engine.
•
Simple cleaning and adjustment work may be carried out by operating
personnel. Maintenance and repair work may only be carried out by trained
specialist personnel.
•
Instructions and instructions from the original operating instructions for the
installed parts must be observed will.
•
If protective devices and working tools are subject to wear, they must be
checked regularly and replaced if necessary.
•
When replacing cutting tools is the appropriate tool use and wear the
appropriate protective equipment.
•
After maintenance and cleaning work, reinstall the protective devices and
bring them into the protective position.
•
Original only-Use spare parts from the manufacturer, as these meet the
technical requirements and thus the risk of accidents is minimized.
•
Cleaning work with the high-pressure cleaner should be carried out so that
the water jet is not held directly on bearings, turned parts, grease nipples,
shaft seals, wheel hubs etc. After each cleaning with the Hochdthe
cleaning points must be relubricated. Failure to do so will void the right to
warranty!
•
Check nuts and bolts for tightness for the first time after 5 hours of
operation and in succession and tighten if necessary.
•
SchutInstall the z equipment after maintenance and bring it into the
protective position.
•
When carrying out maintenance, cleaning and repair work on the raised
device, always secure it with suitable support elements.
WARNING
Risk of injury / danger of environmental damage due to insufficient / faulty
maintenance (hydraulics)!
A lack of maintenance creates the risk of injury and damage to the machine and
the environment and property.
•
Before carrying out repair work, ensure that the hydraulic system is
depressurized because liquids under pressure can penetrate the skin and
cause serious injuries! Therefore, see a doctor immediately - risk of
infection.
•
Check hydraulic connections for the first time after 5 hours of operation,
tighten if necessary.
Only pulling is unsuccessful!
First loosen a leaky hydraulic screw connection, then move the hose or
screw connection. The screw connection can then be tightened again.
Содержание Weedo II
Страница 2: ...DE 2019 03 01 2 79...
