Single-axis weed brush Weedo II
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
DE
Fig.: Components for transporting the machine
1
Transport bracket
2nd
Handles
To transport the machine by crane, use the eyelet on the existing transport bracket
(1) on the uniaxial weed brush. Two people are required to lift the device by the two
handles (2). Lashing for transport can be carried out both on the carrying handles
(2) and on the eyelet of the transport bracket (1).
Before finally tightening the machine for transport, note the following:
•
The machine may only be transported with the throttle in OFF position and
closed fuel tap.
•
NOnly functional sling gear that is functionally correct, safe in terms of safety
and appropriate to the load may be used.
•
Lifting gear must first be pre-tensioned.
•
It is open correct fit and correct load distribution.
Pos: 59 / Anleitungen / 0 Allgemein / #### Seitenumbruch #### @ 0 \ mod_1443087965231_0.docx @ 92 @ @ 1
2019-03-01
41 / 79
Содержание Weedo II
Страница 2: ...DE 2019 03 01 2 79...