Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 144 / 221
Strict confidential
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, that antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than
that necessary for successful communication.
This radio transmitter has been approved by Industry Canada to operate with the antenna
types listed as accessories with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use
with the device.
This equipment should be installed and operated such that a minimum separation distance
of 20 cm is maintained between the radiator (antenna) and user’s/nearby person’s body at
all times.
The radio transmitter has been approved by Industry Canada to operate with a maximum
duty cycle of 40% to not overrule the 2.784 W/m2 RF Field Strength Limits for Devices. The
duty cycle, in normal conditions, is far below this limit. Do not operate the Wirnet iBTS Full-
Duplex out of the 40% duty cycle limit.
