Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 142 / 221
Strict confidential
Be careful:
Este produto está homologado pela Anatel, de acordo com os procedimentos
regulamentados pela Resolução nº 242/2000 e atende aos requisitos técnicos aplicados,
incluindo os limites de exposição da Taxa de Absorção Específica referente a campos
elétricos, magnéticos e eletromagnéticos de radiofreqüência, de acordo com as Resoluçãos
nº 303/2002 e 533/2009.
The frequency channels arrangement is not defined for Brazil in the LoRaWAN specification
and the regional parameters as defined in [1] and [2], but Kerlink recommends following the
Australian plan (AU 915-928MHz).
2.4
Wirnet iBTS Full-Duplex
2.4.1
USA / FCC
The Wirnet iBTS Full-Duplex is compliant to:
-
UL 60950 -1 : 2007, Amendment A1:2011, Amendment A2:2014
The power supply of the Wirnet iBTS 915 must be a limited power source.
The Wirnet iBTS Full-Duplex is also compliant to CFR 47 FCC Part 15 regulations:
-
FCC 47 CFR Part 15 : 2014 - Part 15- Radio frequency devices
-
FCC PART 15.247 - Operation within the bands 902–928 MHz, 2400–2483.5 MHz, and
5725–5850 MHz (frequency hopping and digitally modulated)
o
FCC Part 15.207 conducted emissions on AC mains in the band 150kHz –
30MHz
o
FCC Part 15.247 intentional radiated emissions
o
FCC Part 15.215 Additional provisions to the general radiated emissions
limitations
The associated FCC identifiers of the Wirnet iBTS Full-Duplex are:
FCC ID : 2AFYS-KLK915FDX
Model : WIRNET iBTS FDX
Contains FCCID : N7NMC7355
Model : MC7355
