Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 143 / 221
Strict confidential
As stated by the external sticker on the enclosure, “This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.”
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This device must be professionally installed.
Also, some specific recommendations for exposure to magnetic fields must be followed:
This equipment complies with FCC’s radiation exposure limits set forth for an uncontrolled
environment under the following conditions:
1. This equipment should be installed and operated such that a minimum
separation distance of 20 cm is maintained between the radiator (antenna)
and user’s/nearby person’s body at all times.
2. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
2.4.2
Canada / IC
The Wirnet iBTS Full-Duplex is compliant to:
-
CAN/CSA-C22.2 NO. 60950-1-07 / A1: 2011 / A2: 2014
The power supply of the Wirnet iBTS 915 must be a limited power source.
The Wirnet iBTS Full-Duplex is also compliant to IC - RSS 247 regulations:
-
RSS-Gen – Issue 4, November 2014- General requirements and Information for the
Certification of radio Apparatus
-
RSS-247 Issue 1, May 2015 - Digital Transmission Systems (DTSS), Frequency Hopping
Systems (FHSS) and License-Exempt Local Area Network (LE-LAN) Devices
The associated IC identifiers of the Wirnet iBTS Full-Duplex are:
IC : 20637-KLK915FDX
Model : WIRNET iBTS FDX
Contains / Contient IC : 2417C-MC7355
Model : MC7355
