Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 124 / 221
Strict confidential
UAE.S GSO 1799: Safety Levels With Respect To Human Exposure To Radio Frequency
Electromagnetic Fields, 3 kHz To 300 GHz
In United Arab Emirates, the Wirnet iBTS 868 can be used with the following limitations:
Frequency (MHz)
Power
865-870
17dBm EIRP*
870-873
10dBm EIRP
*: can be increased to 20dBm EIRP with authorization of the TRA.
The frequency channels arrangement is the same as in Europe i.e. must be compliant to the
LoRaWAN specification and the regional parameters (EU 863-870MHz) as defined in [1] and
[2].
2.1.6
Russia
-Minsvyaz approval and EAC marking
required-
The Wirnet iBTS 868 is compliant to:
CU TR 020/2011 : Electromagnetic Compatibility of Technical Products
CU TR 004/2011 : Safety of Low Voltage Equipment
GOST R IEC 60950‐1 ‐ Information technology equipment. Safety. Part 1. General
requirements.
In Russia, the Wirnet iBTS 868 can be used with the following limitations:
Frequency (MHz)
Power
Duty cycle
864-865
14dBm ERP
1%
868.7-869.2
14dBm ERP
N/A
The frequency channels arrangement is defined in the LoRaWAN specification and the
regional parameters (RU 864) as defined in [1] and [2].
2.2
Wirnet iBTS 915
2.2.1
USA / FCC
The Wirnet iBTS 915 is compliant to:
-
UL 60950 -1 : 2007, Amendment A1:2011, Amendment A2:2014
The power supply of the Wirnet iBTS 915 must be a limited power source.
The Wirnet iBTS 915 is also compliant to CFR 47 FCC Part 15 regulations:
