manualshive.com logo in svg

KEPCO KLR SERIES, Руководство разработчика

Поделиться
Скачать
KEPCO KLR SERIES Скачать руководство пользователя страница 46

4-4

KLR-DEV 060713

4.4.1.3

BLOCK DIAGRAM DESCRIPTION

Figure 4-2 shows that the level input is converted to a string that is compatible with the power
supply, floating with 5 places to the right of the decimal (%.5f). Then, using the VISA write func-
tion, the string is sent to the power supply. The case statement in the middle of Figure 4-2
shows that all Kepco power supplies support this same functionality.

TABLE 4-2.  KepcoDCPwr Configure Voltage Level.vi INPUT/OUTPUT DESCRIPTIONS

DESCRIPTION

SYMBOL

channel name - 

(

“”

) Passes the name of the channel on which to configure the voltage level. It is not required for 

most supplies and is provided for compatibility.
Valid Channel Names: 1 - 27

Default Value:  “”

level (0.0 volts) -

 Passes the DC voltage the power supply is to generate. The driver uses this value to set the 

Voltage Level. The level is not checked by the driver function but is checked by the KLR or power supply. 
Default Value: 0.0 volts

error in (no error) 

- The 

error in

 cluster can accept error information wired from VI’s previously called. Use this 

information to decide if any functionality should be bypassed in the event of errors from other VI’s. The pop-up 
option Error (or Explain Warning) gives more information about the error displayed (see Table 4-3). 

VISA Session

 - The 

ViSession

 handle is obtained from the 

KepcoDCPwr Init

 or 

KepcoDCPwr InitWithOptions

 

function. The handle identifies a particular instrument session. Default Value: None

Model

 

In

 - 

Model In 

is the type of Kepco power supply. This defines the capabilities and requirements in other 

Kepco functions to insure proper operation of the command. This function works on All Kepco power Supplies: 
BOP-HP, BOP-LP, KLR, STANDARD, MULTI and MULTI_PLUS. The MULTI type power supplies require a chan-
nel number to operate correctly. The constant is created by the Recognize Kepco model utility.

error out - 

The 

error out 

cluster passes error or warning information out of a VI to be used by other VI’s. The pop-

up option 

Explain Error

 (or Explain Warning) gives more information about the error displayed (see Table 4-3). 

VISA Session Out

 - The 

ViSession

 handle is obtained from the 

KepcoDCPwr Init

 or 

KepcoDCPwr InitWithOp-

tions

 function. The handle identifies a particular instrument session.   Default Value: None

Model Out - 

The 

Model Out

 handle is obtained from the 

KepcoDCPwr Init

 or 

KepcoDCPwr InitWithOptions

 func-

tion. The handle identifies a particular instrument.   Default Value: None

channel name out

 - (

“”

) Passes the name of the channel on which to configure the OVP limit.

Valid Channel Names: 1-27;    Default Value:  “”

TABLE 4-3.  ERROR (OR EXPLAIN WARNING) CODES

status

 - The boolean is either TRUE (X) for an error, or FALSE (check mark) for no error or a warning. The 

pop-up option 

Explain Error

 (or Explain Warning) gives more information about the error displayed.

code

 - The 

code

 input identifies the error or warning. The pop-up option 

Explain Error

 (or Explain Warning) 

gives more information about the error displayed.

source

 - The string describes the origin of the error or warning. The pop-up option 

Explain Error

 (or Explain 

Warning) gives more information about the error displayed.

Содержание KLR SERIES

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды