Kenwood NX-1200 D K2, Справочник по функциям

Страница: 10 / 132

3 DMR function
10
The function to store IDs of callers in the stack memory ( Caller ID Stack )
Type
‘ ■
Standard model
□
Basic model
Description
Caller ID Stack is the function to store IDs of callers in the stack memory.
The transceiver can store a maximum of 64 Caller IDs.
Caller ID Stack
Configuration Description
None The Caller ID is not stored even if a call is received.
Individual Call, Only the Caller ID of an Individual Call or Paging Call is stored.
Any Call The Caller IDs of all calls are stored.
However, the Caller IDs of Unaddressed Calls and Broadcast Group Calls are not
stored in a DMR Conventional system.
Operating the transceiver Stacking Caller ID Transceiver behavior :

When the transceiver receives a call, icon blinks to
indicate that the Caller ID is being stacked.
Note -
Configuration using FPU Caller ID Stack
：
Edit > Optional Features > Optional Features 1 > Common 4 > Stack Condition
Call ID for Message , Channel Name , Stack Order :
Edit > Optional Features > Optional Features 1 > Common 4 > Message Display
Status Hold
：
Edit > Optional Features > Optional Features 1 > Common 4
Viewing the Receive History (Stack) (
Clear Caller ID Stack on Reply )
Type
‘
■
Standard model
□
Basic model
Description
Clear Caller ID Stack on Reply is the function to clear a Caller ID from the stack memory of the transceiver if
the Caller ID stored in the stack memory is selected and called back.
Also, the Caller ID of the calling party is stored in the stock memory when the transceiver receives a call, but the
Caller ID is cleared from the stack memory if a response is initiated while the Auto Reset Timer is counting down.
Subsequently, the Caller ID is not stored in the stack memory even if a call from the same party is received while
the Auto Reset Timer is counting down.
If this function is disabled, a Caller ID is not cleared from the stack memory of the transceiver even if the Caller
ID stored in the stack memory is selected and called back.
Operating the transceiver
- -
Note -
Configuration using FPU
Clear Caller ID Stack on Reply
：
Edit > DMR > General
Caller ID Stack
：
Edit > Optional Features > Optional Features 1 > Common 4 > Stack Condition
Indication and Display ( Selective Call Alert LED )
Type
‘
■
Standard model
■
Basic model
Description Selective Call Alert LED is the function to make the LED flash when the transceiver receives a call using a DMR
ID.
A user can notice by the LED that the transceiver is receiving a call.
One of the 7 colors can be used to make the LED flash, and the flashing color can be configured for each type of
call.

Yellow

Purple

Blue

Light Blue

Red

Green

White
Operating the transceiver - -
Note -
Configuration using FPU Selective Call Alert LED :
Edit > DMR > Conventional 3
Individual Call , Group Call , Broadcast Group Call , Paging Call :
Edit > DMR > Conventional 3 > Selective Call Alert LED > LED Color