3 DMR function
34
Using the GPS Function (GPS Function)
Type
‘
■
Standard model
■
Basic model
Description
Global Positioning System (GPS) is the system to acquire the current location information of the own transceiver
by receiving signals from the Global Positioning System satellites orbiting the earth.
The transceiver of the mobile station can send the acquired own location information (GPS data) to the base
station. The base station can send received GPS data to the PC as serial commands.
Operating the transceiver
GPS Data transmission
GPS data transmission completed
Transceiver behavior :
When GPS Report Interval Time expired, or when receiving a
GPS Data transmission request, it sends GPS Data.
"SEND DAT" is displayed during GPS data transmission.
When "COMPLETE" is displayed 1 second when GPS data
transmission is completed.
The Transmit LED lights up while sending GPS data.
Note
-
Configuration using FPU
GPS Report Mode
,
Number of Times
,
GPS Time Mark
,
GPS Report Interval Time
,
GPS Message Type
,
GPS Distance Change
,
Respond to Polling ID
:
Edit > Optional Features > Optional Features 2 > GPS
Transmission Method of GPS Data (
DMR - GPS Base Station
)
Type
‘
■
Standard model
■
Basic model
Description
ID (GPS
>
Base Station)
is the ID of the target transceiver used for sending GPS data.
By using KPG-D6/ D6N, either Unit ID or Group ID can be configured as
ID (GPS
>
Base Station)
.
The ID of the base station which is responsible for operation and administration of system is normally
configured.
Operating the transceiver
-
-
Note
If
ID (GPS
>
Base Station)
is not configured, GPS data is sent to the
Base ID
to which data such as a Status
Message and Short Message is to be sent.
Configuration using FPU
ID Type
,
ID
：
Edit > DMR > GPS > Base Station
Base ID
: Edit > DMR > Conventional 1
Transmission Method of GPS Data (
DMR - GPS Combination
)
Type
‘
■
Standard model
■
Basic model
Description
The transceiver can send GPS data by adding the GPS data to a Status Message using DMR.
To use this function,
Status
for
GPS Combination
must be enabled by using KPG-D6/ D6N. The range of
status numbers (
Combination Status Range
) to which GPS data can be added can be configured.
Operating the transceiver
-
-
Note
The GPS data added to a Status Message is sent to the ID configured for
Base ID (GPS)
or
Base ID.
Configuration using FPU
Status
,
Combination Status Range
,
Emergency
:
Edit > DMR > GPS > GPS Combination
Transmission Method of GPS Data (
DMR - GPS Report with Voice
)
Type
‘
■
Standard model
■
Basic model
Description
The transceiver can multiplex GPS data on audio data and send the data during voice communications.
Operating the transceiver
-
-
Note
GPS data is multiplexed at the start of audio data transmission.
Configuration using FPU
Report
：
Edit > DMR > GPS > GPS Report with Voice
