4 NXDN function
78
Making a Group Call (
Group ID List
)
Type
‘
■
Standard model
■
Basic model
Description
The transceiver uses a Group ID configured in the Group ID List to initiate a Group Call in an NXDN
Conventional system.
The desired Group IDs must be preconfigured using KPG-D6/ D6N for the transceiver to initiate a Group Call.
A maximum of 1,000 Group IDs can be configured in the Group ID List.
Group ID List
Configuration
Description
ID
A Group ID can be configured in the range between 1 and 65519, or in the range
of ALL.
ALL allows initiation of a call to all IDs.
ID Name
The caller
’
s ID Name is configured. A maximum of 8 characters can be
configured for the ID Name.
If the ID Name of the group is configured in the Group ID List, the ID Name
appears when the transceiver receives a call. If the ID Name is not configured in
the Group ID List, the Group ID List number appears.
Type
The permission or inhibition of transmission of the receiving party can be
configured.
An ID for which
“
Receive Only
”
is configured for
Type
does not appear on the
ID selection display in Group Call Mode, and a user cannot select the ID in Group
Call Mode.
If the transceiver receives a call from an ID for which
“
Receive Only
”
is
configured for
Type
, the caller
’
s ID Name appears. In this case, a user cannot
initiate a call to the party even if the user attempts to respond by pressing the
PTT
switch.
Alert Tone
The tone type sounding from the transceiver can be configured for a Group Call
from the Group IDs registered in the Group ID List.
Alert LED Color
The color of flashing LED can be configured for a Group Call from the Group IDs
registered in the Group ID List.
Operating the transceiver
-
-
Note
To use Alert LED Color,
Selective Call Alert LED
needs to be enabled.
Configuration using FPU
ID
,
ID Name
,
Type
,
Alert Tone
,
Alert LED
:
Edit > NXDN > Group ID List
Making a Group Call (
Group ID Scan
)
Type
‘
■
Standard model
■
Basic model
Description
Group ID Scan
is the function to standby to receive a Group Call from all Group IDs in an NXDN Conventional
system.
If this function is enabled, the transceiver is on standby to receive a Group Call from all Group IDs configured for
Group ID List.
If this function is disabled, the transceiver is on standby to receive only the Group Calls from the Group IDs
configured for
Call Type
or for
Persistent Group ID (NXDN)
.
Operating the transceiver
-
-
Note
This function can be used
only if “Group Call” is configured for
Call Type
.
Configuration using FPU
Group ID Scan
: Edit > Zone Information > Channel Edit > NXDN
Call Type
: Edit > Zone Information > Channel Edit > NXDN > Selcall on PTT
Persistent Group ID (NXDN)
: Edit > Zone Information > Zone Edit - Conventional Group
Preventing the Functions Working with Group Call Reception from Activating (
Group Call Alert Inhibit
)
Type
‘
■
Standard model
■
Basic model
Description
Group Call Alert Inhibit
is the function that disables the Alert Tone, Selective Call Alert LED, and Caller ID
Stack functions when the transceiver receives a Group Call.
Operating the transceiver
-
-
Note
-
Configuration using FPU
Group Call Alert Inhibit
: Edit > NXDN > General 1
