Kenwood NX-1200 D K2, Справочник по функциям

Страница: 46 / 132

3 DMR function
46
About Communication Security (
Encryption )
Type
‘
■
Standard model
■
Basic model
Description Encryption is the function that enhances secrecy in communications on the DMR digital channels by encrypting
voice data or user data such as a Short Message.
Operating the transceiver Encryption icon behavior when receiving
In case of bit scramble/ARC4
In case of bit scramble
In case of ARC4
Transceiver behavior :
•
When carrier is not received:
When the Encryption status is On, the icon lights up. (In the
case of bit scrambling method/ In the case of ARC4)
Transceiver behavior :
•
When all of the following conditions are satisfied at the time of
receiving an encrypted carrier, the icon blinks when
Encryption Type = Type 1 regardless of the state of
Encryption.
If the Encryption status is Off and Encryption Type = Type 2, the
icon will not be lit. (In case of bit scramble)
•
When receiving the encrypted carrier, the icon blinks
when all of the following conditions are satisfied. (In case of
ARC 4)
Note -
Configuration using FPU -
Using Communication Security ( Bit Scramble Encryption Type )
Type
‘
■
Standard model
■
Basic model
Description The bit scramble encryption type is the Encryption function embedded in the transceiver.
To transmit or receive a signal, the communication data can be encrypted or decrypted using the encryption key
data configured in the transceiver. By means of bit scramble, the transceiver can encrypt audio data only.
Encryption Type
Configuration Description
Enabled For audio data, regardless of the configuration for Encryption Type (DMR), the
received audio sounds from the speaker according to the audio control conditions
and the configuration in the Multi-key List.
Disabled The following are the transceiver behaviors that may vary depending on the
configuration for
Encryption Type (DMR) (Type 1 or Type 2):

Type 1
The transceiver behaves in the same manner as a transceiver with Encryption
enabled.

Type 2
No received audio sounds from the speaker.
Operating the transceiver
- -
Note

When unencrypted communication data is received, the transceiver emits the received audio from the
speaker according to the audio control conditions regardless of the Encryption status (enabled or disabled) or
configuration for
Encryption Type (DMR).
Configuration using FPU
Encryption Type
：
Edit > Encryption > DMR