Kendro Sorvall Legend RT Скачать руководство пользователя страница 40

Страница: 40 / 101

Rotors and accessories

Aerosol-tight operation

Aerosol-tight rotors and tubes are only
to be opened in an approved safety
work bench when centrifuging danger-
ous samples!

Paying attention to the maximum per-
missible filling quantities is necessary!

Correct operation when filling the sample tubes and
closing the rotor cover are prerequisites for aerosol bio-
containment.

Before use, the seals in the rotors and
rotor covers, as well as the aerosol-
tight caps, have to be checked for
abrasion or damage and slightly
greased.

Replace damaged O-rings and seals!

Use the special lubricant
7600 3500 only to grease the seals !

Spare parts are delivered with the rotor or may be or-
dered separately.

Replace damaged or clouded caps
and lids of rotors and tubes
immediately.

The tubes are only to be filled such that the sample
does not reach the rim of the tube during centrifuging.

Содержание Sorvall Legend RT






































































































Результаты поиска

Содержание Sorvall Legend RT

Отзывы:

Похожие инструкции для Sorvall Legend RT

Бренды по названию

Популярные бренды

Kendro Sorvall Legend RT, Инструкция по эксплуатации

Результаты поиска

Содержание Sorvall Legend RT

Отзывы:

Похожие инструкции для Sorvall Legend RT

Бренды по названию

Популярные бренды