Kendro Sorvall Legend RT, Инструкция по эксплуатации

Страница: 54 / 101

Operation
50
3. After the required value has been achieved the
decimal place is flashing several seconds and the
display changes to the continuous display. The run
time has been stored now.
Reaching the set values can be accelerated by press-
ing the adjusting knob once again like for the speed
selection (see there).
Continuous operation
In order to set Multifuge
®
into continuous operation,
you have to change the time input until the display
shows "hLd“.
With this setting the centrifuge oper-
ates until you terminate it manually
with "Stop“-key
.
Extended time mode
As an option there is the possibility to change to the
extended time mode. Switching on respectively off this
option is activated by pressing the speed-/rcf-switch
key while switching on the centrifuge. As long as
you keep the key pressed, the selective mode is active.
By pressing the adjusting knob in the speed field you
can select between signal set menu "beep“ and time
menu "t-set“.
After having selected the time menu "t-set“, you can
switch between standard time mode "00.0“ and ex-
tended time mode "00.h“ by pressing the adjusting
knob in the time field.
The time input in excess of 10 hours is set in one hour
increments.