Kendro Sorvall Legend RT, Инструкция по эксплуатации

Страница: 51 / 101

Operation
47
Entering parameters
Deceleration curves
The Legend™ offers 3 deceleration profiles for optimal
centrifuging of samples and gradients. Please consult
the diagrams in the Appendix for more detail of the
deceleration curves (for rotors not mentioned here you
may extrapolate the respective values).
After switching the centrifuge on, the centrifugation
profiles last entered are selected.
By pressing the “set“ key you can scroll through the
profile settings until the desired profile is reached.
Once the display stops flashing, the value is stored in
memory and remains unchanged until changed by a
new entry.
Switching from speed to RCF display
Upon turning the centrifuge on, the speed display is
set.
Use the speed mode selection key to switch speed
entry and display between rpm and RCF.
Bucket selection for swinging bucket
rotors
When running a swinging bucket rotor, the automatic
rotor identification feature will recognize the rotor body
and not determine which bucket or carrier is installed.
Depending on the bucket or carrier installed on the
rotor body the corresponding type of bucket or carrier
must be selected on the bucket selection function. The
bucket selection affects the correct RCF values display
and the correct selection of the corresponding parame-
ters of the temperature regulation.
The current part number of the buckets is displayed by
pressing the bucket selection key (corresponds to the
last four 4 digits of the order number).
To change the bucket
selection, press the bucket
selection key again until the
correct set of buckets ap-
pears.
The value is accepted when the change back to the
speed RCF display has occurred.