Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 38 of 43
At the end, the system goes back to the initial option selected
SUBMENU GSM/SMS:
A.1-RESET BY STEP
SPACE=NEXT
ENTER=SELECT
If everything is allright, the menu goes to the previous screen. In
case of error, the screen would be the one beside
MODEM NOT RESPONDING
PRESS ANY KEY TO END.
10.2 - Coverage test
It allows the verification that the coverage of the GSM module is correct. A bad coverage willl not allow the
communication with the unit. The maximum coverage value is 31,99.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
A
Select the modem adjustments.
SUBMENU GSM/SMS:
A.0-MODEM RESET
SPACE=NEXT
ENTER=SELECT
2
Visualises the coverage (quality of the signal). If the communication
is correct, a similar message as beside will appear:
QUALITY [00...32]:
+CSQ: 21,99
OK
Any key
Pressing any key, the coverage test ends and the system goes back to
the initial option selected
SUBMENU GSM/SMS:
A.2-SIGNAL QUALITY
SPACE=NEXT
ENTER=SELECT
If everything is allright, the menu goes to the previous screen. In
case of error, the screen would be the one beside
MODEM NOT RESPONDING
PRESS ANY KEY TO END.
10.3 - Central telephone
With this option, you indicate to the unit which is the telephone number of the Data Center (Telephone 1) and which are the
additional ones for consultations. The unit will only respond to the calls and messages coming from the telephone numbers
that you indicate in this procedure.Of the three possible telephone numbers, only the telephone number 1 is allowed to clear
the cummulated counters of the collections. The other two can only program the unit and consult the collections.In the
same way, the messages sent by the unit automatically will only be addressed to telephone number 1.
Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
A
Select the modem adjustments.
SUBMENU GSM/SMS:
A.0-MODEM RESET
SPACE=NEXT
ENTER=SELECT
3
Select the programming of the phone umber of the Data Center
TELEPHONE NUMBER 1:
123456789
Numeric
keys
Indicate the telephone number. If you press “ESC” the proces will
be cancelled. The phone number can have a maximum of 15 digits.
TELEPHONE NUMBER 1:
987654321
ENTER
When press ENTER, the screen shows the telephone number 2
TELEPHONE NUMBER 2:
123456789
Numeric Indicate the telephone number. If you press “ESC” the proces will
TELEPHONE NUMBER 2:
