Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 2 of 43
A - Access to the Advanced Programming Mode.
Steps:
1.
Switch the K7 off.
2.
Open the back cover.
3.
Connect the RS-232 programming terminal or the computer with the HTE program started to the connector JP2
(RS-232#1) of the Main Board P1PC.
4.
Switch the K7 on.
5.
During autotest, press several times the "ENTER" key.
6.
When the autotest is finished, you will be in the Advanced Programming Mode.
7.
Make the necessary adjustments.
8.
When finished, switch the K7 off again.
9.
Disconnect the terminal or the cable going to the computer
10.
Switch the K7 on. It is ready for use.
B - Operating in the Advanced Programming Mode.
B.1- Description of the programming terminal
The terminal has got an LCD screen with 4 lines of 20 characters and a 45 key keyboard.
The 5 keys on top (F1, F2,...F5) are the function keys, used to program special characters such as "Ñ" in Spanish during the
programming of the header and footer of the ticket.
The other keys (except the numeric ones 0,1,2...9) have got two functions:
·
When pressing them directly, the character to be programmed will be the one showed on white background.
·
When pressing them
together with the "SHIFT" key
, the character to be programmed will be the one showed on
blue background.
LCD screen with 4 lines
of 20 characters.
Alphanumeric
keyboard.
Special function
keys
