Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 33 of 43
CTRL+C
When you press
CTRL+C on line 5, the program saves the contens of the
header and...
WAIT A MOMENT...
... goes back to option 0 of the ticket header and footer sub-menu.
HEADER/FOOTER:
7.0-TICKET HEADER
SPACE=NEXT
ENTER=SELECT
8 - Configuration of the smart cards. Option 8 of the main menu.
The unit is equipped with a smart card reader. Its basic application (there can be other ones) is the use as a pre-payment and
data storing system for the user of the unit. A sector of the card stores the
credit
and the
number of the unit to which the
card is assigned
and another sector stores the
last 20 measurements
of weight, height and blood pressure, with the date of
every measurement.
The user can buy a card with a number of credits for use already stored. Every time that he inserts the card in the unit at the
premises where he bought the card, he will be able to make a complete operation, whose results will be stored (as a history)
in the card. He will also obtain a list of the stored measurements in the card. The credit will decrease as long as he uses the
unit. Once finished, the card can be recharged with new credit or even be returned so that it can be reused by another
person who buys it.
The group of options depicted in the present chapter, allows you to record the identification number that the unit and the
card will use (so that a unit can recognize if a card belongs to that premise (or group of premises) or not), erase the data
contained in the card, charge new credits and list the recorded measurements and/or the identification data of the card.
If a card is used in a premise other than the one where it was purchased, the user will have to insert coins to use the unit.
But if he inserts the card and keeps it until the end of the process (printing of the ticket), the results will be stored in the
card. He will not be able to obtain a list of the stored measurements, since this option is only possible at premise where he
bought the card.
8.0 - Programming of the key number in the card
This key number, which remains stored in the memory of the unit, is recorded automatically in the cards when doing the
operations of credit charge and card data erase. This way, the unit knows if a card belongs to that premise or not.
Suppose that you want to set the key number 123 for the smart cards. Proceed as follows:
Key
Function to execute or select
Terminal Display
'Z' or 'ESC' Goes to option 0 of the main menu.
MAIN MENU:
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
8
Select the smart card adjustments.
SMART CARD:
8.0-CARD KEY
SPACE=NEXT
ENTER=SELECT
0
Select the programming of the smart card key.
The display shows the current key number.
CARD KEY: 12345
0,0,1,2,3
Indicate the new key. We highly recommend to set the serial number
of the unit. The key number must have 5 figures and its maximum
value cannot exceed 65535.
CARD KEY: 00123
ENTER
When pressing ENTER, the new key will be saved and the program
will go back to option 0 of the smart card sub-menu.
SMART CARD:
8.0-CARD KEY
SPACE=NEXT
ENTER=SELECT
