Keito K7
Technical and maintenance
Manual
INT.022EN.02
Revision “I”
24/09/2010
Page 3 of 43
B.2 - General operation.
During autotest, the display will show the version and date of the software. Once you have accessed into the programming
mode, the display will show the following message :
Text appearing on the terminal screen
when entering the programming mode
The advantage of having a display is that the programming is more intuitive and allows a better knowledge of the operation
in progress.
·
The main menu has got 10 options which will appear successively as long as the "SPACE" key is pressed.
·
If in any of the main menu options the "ENTER" key is pressed, you will access the corresponding sub-menu.
·
When accessing a sub-menu (as well as in the main menu), if you press the "SPACE" key the options of the current
sub-menu will appear.
·
If when in a sub-menu you press the "ENTER" key, the program will execute the selected function.
·
If when in a sub-menu you press the "Z" key or the "ESC" key, the terminal will go back to option 0 of the main menu.
(system adjustments)).
·
If during a test or a selection you press the "ESC" key, the terminal will go back to the corresponding option of the
sub-menu.
Keys
Function
SPACE
Used to move in a sub-menu and in the main menu.
ENTER
Used to select an option of the main menu or to make an adjustment or select an option in a sub-menu.
Z or ESC
Goes back to option 0 of the main menu when you are in a menu or a sub-menu.
ESC
Cancels the current executing option and get back to the menu from which this option was called.
The following table shows all the options of the main menu and its corresponding sub-menus:
MAIN MENU
0-SYSTEM ADJUSTMENTS
SPACE=NEXT
ENTER=SELECT
