RAPT Temperature Controller Instruction Manual
Page
12
of
17
Last Updated 24/05/2022 12:17 PM
Move the cable glands to the back of the unit and secure in place with the slotted blanking plate,
then secure the slotted blanking plate to the housing using the two screws. Then reassemble the
front and back housings and secure with screws.
You can then custom design your own panel or cabinet to mount this temperature controller into
with the outlets and wiring now exiting out the back of the controller allowing for a very neat
mounting arrangement.
Alternatively, if you want to mount this on your bench top or on top of your fermentation chamber
you can use the mounting plate as a stand to keep the temperature controller in an upright position.
Simply slide the temperature controller housing onto the guides on the mounting plate as shown to
the right.
