RAPT Temperature Controller Instruction Manual
Page
7
of
17
Last Updated 24/05/2022 12:17 PM
Note: You can not make a Temperature Profile on the RAPT Temperature Controller itself. It must
be made and started from the RAPT Portal first and then it will be automatically stored on the
device to be started manually in the future.
If you make any changes to the temperature profile on the RAPT Portal the RAPT Temperature
Controller which check for any updates and apply these changes automatically when the profile is
started manually through the controller.
Operation Instructions
1.
Sign up for an account on the RAPT Portal.
2.
Connect your RAPT Temperature Controller to your Wi-Fi network.
3.
Register your device on your account on the RAPT Portal.
4.
Insert the temperature probe into the thermowell of your fermentation vessel.
5.
Plug your
heating
device into the
red
240V outlet on the RAPT Temperature Controller and
plug your
cooling
device into the
blue
240V outlet on the RAPT Temperature Controller.
6.
Set your target temperature on the RAPT Temperature Controller manually or through the
RAPT Portal. Alternatively, you can begin a Fermentation profile on the RAPT Portal.