RAPT Temperature Controller Instruction Manual
Page
9
of
17
Last Updated 24/05/2022 12:17 PM
Mounting your RAPT Temperature Controller into your Brewery
The RAPT Temperature Controller offers a number of different mounting options offering the
versality to be able to change how to controller is mounted depending on what you are using the
controller for.
The controller is provided as standard with a mounting plate which is installed onto the controller
out of the box. This mounting plate can be removed if you would instead prefer to mount the
controller onto the wall for example.
Removing the Mounting Plate
To remove the mounting plate, slide the mounting plate down towards the bottom of the controller.
Wall Mounting Option 1
If you prefer to mount the RAPT temperature controller to your wall however you did not want to
damage the wall by screwing into it you can attach the mounting plate to the wall using strong
double-sided tape and then slide the RAPT temperature controller onto the mounting plate to
secure it.
Wall Mounting Option 2
Screw two screws into the wall using the following template as a guide. Then simply hook the
controller onto the screws using the mounting points provided on the back of the controller.
RAPT Temperature Controller Drill Mounting Template
