RAPT Temperature Controller Instruction Manual
Page
11
of
17
Last Updated 24/05/2022 12:17 PM
This is designed for an 8G screw, however 10G will also work but it will sit a little proud on the face
of the controller.
Vertical Bench/Panel Mounting
WARNING: Ensure the temperature controller is unplugged from the wall socket before changing
the orientation of the cables.
If you want to neatly mount the RAPT Temperature controller vertically onto your bench or into a
custom designed cabinet/panel for example, the orientation of the cables can be quickly and easily
rearranged. To achieve this, undo the 4 screws which hold the front and back housings together and
then pull the two housings apart.
Unscrew the two screws which hold the slotted blanking plate to the housing and remove the
slotted blanking plate.
