RAPT Temperature Controller Instruction Manual
Page
6
of
17
Last Updated 24/05/2022 12:17 PM
3. Register your RAPT Temperature Controller to your Account on the RAPT
Cloud
1.
Once your RAPT Temperature Controller is connected to your Wi-Fi network you will then
need to register your device with your RAPT account. When prompted on the screen, press
select (
⏎
)
to enter the main menu then select
Register Device
.
2.
Follow the prompts on the display of your RAPT Temperature Controller. Log in to your
account on the RAPT Portal and select
Add
new
Device
3.
Select
RAPT Temperature Controller
and input the MAC Address and Validation Code
displayed on your RAPT Temperature Controller when prompted.
Congratulations! Your RAPT Temperature Controller is connected to Wi-Fi and registered to your
RAPT Account and can now be controlled through the RAPT Portal.
Remote Operation via the RAPT Portal
Setting the Target Temperature
At the home screen of the RAPT Temperature Controller press the Up or Down arrow to adjust the
Target
value on the bottom left of the display. The
Target
value displayed will be the set point for
the device.
The RAPT Temperature controller will then automatically turn on/off the heating and/or cooling
devices plugged into the outlets as required.
The temperature set point can also be set through the RAPT Portal or a profile session can be started
from the RAPT Portal which will automatically begin the profile you have created.
Setting up a Temperature Profile
Once you have registered your temperature controller on the RAPT Portal you can then log
telemetry from the device and set up complex temperature profiles involving multiple steps.
To setup a temperature profile on the RAPT Portal, select
Profiles
and then
Create New Profile
.
Then add your temperature profile steps such as primary fermentation, diacetyl rest, dry hop, cold
crash etc.
Starting a Temperature Profile
Once you have made your temperature profile, either select
Send Profile to Device
from the profile
or
Start Profile Session
on the Dashboard to send the profile to your RAPT Temperature Controller.
Saving a Temperature Profile on the RAPT Temperature Controller
Temperature profiles are automatically stored on the RAPT Temperature Controller once the profile
session has been started from the RAPT Portal and profile session has been started on the device
from the RAPT Portal.