KC-P30 x-series
System overview
Configuration manual V4.14
9
© KEBA
Client charging stations from the c-seriescan only be connected to the mas-
ter (P30 x-series) over LAN.
2.1.1
LAN
P30 x-series can be connected to a router via the integrated LAN interface.
The router establishes a connection to an OCPP backend via internet.
1
... P30 x-series
2
... Router
3
... Internet
4
... OCPP backend
Connection
: Ethernet1 connection (LSA+
®
)
Via the LAN interface, P30 x-series can also be connected to other charging
stations, allowing to implement a charging network.
Information
The Ethernet1 connector X4 (LSA+
®
) and the Ethernet2 connector X3
(RJ45) are connected in parallel on the PCB and cannot be used at the
same time. The unused connection must be disconnected if necessary (e.g.
during servicing).
The Ethernet1 connection X4 is designed as a terminal block in LSA+
®
tech-
nology. It is recommended to implement hard-wired communication (e.g. for
SmartHome or a charging network) at the LSA+
®
connection.
2.1.2
WLAN (optional)
P30 x-series can be connected to a router via the integrated WLAN inter-
face. If the router is connected to the Internet, a connection to an OCPP
backend can be made.
