KC-P30 x-series
Configuration
Configuration manual V4.14
18
© KEBA
Adapting the filename
The filename contains the serial number of the charging station from which
the configuration was read out. This serial number must be deleted from the
filenames.
A configuration file without a serial number in the filename can be used for
the configuration of multiple charging stations. If the configuration is only
valid for exactly one charging station, the filename must include the serial
number of the desired charging station.
Adapting the content
The specific configurations that only apply to one charging station must be
adapted or deleted in the configuration file.
All settings are listed in the configuration file. The individual sections are
marked with [Name]. The name of the parameter (designation) is to the left
of the equal sign ("="). The value is located to the right.
To adapt and delete the specific configurations, proceed as follows:
1) Open the configuration file with a text editor
2) Change the following entries:
►
AmountConnectors=[x]
The number of charging stations in the charging network must be
adapted here.
3) Delete the following entries completely:
►
ChargeBoxIdentity=[xxx]
►
Connect2ConnectorSerial[x]=[xxx]
►
HOTSPOT_SSID=[xxx]
►
HOTSPOT_KEY=[xxx]
4) Save the file
Information
By deleting all
Connect2ConnectorSerial
entries, the charging station au-
tomatically searches for other charging stations in the charging network.
The number of charging stations specified under
AmountConnectors
is the
number searched for.
Adapting the configuration (optional)
The configuration may need to be adapted manually. Each of the settings
listed can be adapted by editing the value to the right of the equal sign "=".
Example of a possible adaptation to the configuration
Original configuration
Adapted configuration
AuthorizationEnabled=
true
AuthorizationEnabled=
false
