KC-P30 x-series
Web interface
Configuration manual V4.14
26
© KEBA
Information
The settings made are only applied after the "Apply" button has been
pressed.
Device
The basic settings for the charging station are configured here:
●
Managing the authorization function
●
Synchronizing the time of the charging station with the time of the
browser (the charging station restarts after a time synchronization)
●
Activating and deactivating the USB stick functions
●
Deleting the event log (log file)
●
Rated voltage to which the charging station is connected
●
Behavior of the charging station after a power failure
Network Connection
Here the network communication (WLAN Access Point, SIM, APN connec-
tion data) can be selected and configured
Routing
Settings for necessary routing can be made here
Proxy
All the necessary configurations for using a proxy server can be found in this
part.
OCPP
All the necessary configurations for connecting to an OCPP backend can be
found in this part. The displayed configuration options vary depending on the
selected transmission type.
If a connection to the KEBA eMobility Portal is established via the KEBA
eMobility App, no settings need to be made here. If the settings are changed
on the WebUI, those in the KEBA eMobility App are overwritten.
OCPP Certificates
For an encrypted connection, certificates can be imported in
*.pfx
format.
The connection to the OCPP backend and charging station can be en-
crypted. The following certificates are available:
