KC-P30 x-series
Web interface
Configuration manual V4.14
20
© KEBA
4
Web interface
The necessary settings (main menu "Configuration") for the communication
of the charging station are configured in the web interface. The configuration
for the entire charging network is done via the master.
The actual size of the web interface may differ depending on the device vari-
ant.
A network connection is required to access the web interface of the master.
The network connection can be made via LAN, WLAN, WLAN access point
or mobile communications (e.g. with PC or mobile terminal).
The master web interface can be accessed by entering the IP address of the
master in a web browser.
The IP address of the master is determined differently depending on the
connection type.
WLAN access point
The IP address of the WLAN access point is printed on the con-
figuration label.
Router with integrated
DHCP server
The charging station automatically receives an IP address via
the DHCP server of the router. The IP address is displayed on
the charging station display when the charging station is
(re)started. The IP address can also be determined via the
router.
Master with local DHCP
server
The local DHCP server has been activated for the master,
which automatically gives the master the following IP address:
192.168.42.1
The DHCP server of the charging station is deactivated in the
delivery state and can be activated via the configuration in the
web interface.
A login is required to use the web interface.
The login data for the first login in the web interface is printed on the configu-
ration label. The configuration label is in a pouch affixed to the installation
materials. For security reasons, change the password after the initial login.
In doing so, observe the password guidelines, refer to
.
Fig. 4-5: Configuration label
After successful login, the start page of the web interface opens.
