KC-P30
Maintenance
Installation manual V3.28
51
© KEBA
Removing the cylinder lock
1) Turn the key to the left until the resistance is noticeably overcome.
2) Turn the key further until it is in a vertical position. The cylinder lock can
then be unlocked from the holder using slightly increased force and re-
moved.
Fitting a cylinder lock
1) Use a thin object to push in the coding pin to turn
the lock nose.
2) Turn the lock nose
1
so that it points vertically up-
wards in the removal position of the key.
3) Turn the key 180° so that the lock nose faces down-
ward.
4) Use light pressure to press the cylinder lock into the
housing completely until it audibly engages. The cylin-
der lock should be flush with the surface of the hous-
ing.
5) Turn the key to the right until the resistances have
been noticeably overcome and the key can be re-
moved.
Do not turn the key past the [MAX] position.
The key switch is now ready for use.
