Keba D3DP 3 Series, Руководство по проектированию устройства, Страница: 64 / 82

D3­DP 3xx/x Options
Project engineering manual V1.00
64
© KEBA
● If other devices are supplied from this switched­mode power supply, the
power figure must be correspondingly higher.
Caution
The connection GND of terminal X01C (24 V DC) on the supply module is at
earth potential (PELV). The connector assignmend must be checked (e.g.
because of connecting control cable shields other appliances could be dam­
aged).
11.3 Version with integrated braking resistor
Applies to D3­DP 3xx/x­ xxx1 (in preparation)
11.3.1 Purpose of the function
In regenerative operation, e.g. when braking the drive, the motor feeds en­
ergy back to the axis module. This increases the voltage in the DC link. If the
voltage exceeds a threshold value, the internal braking transistor in the sup­
ply module is activated and the regenerated power is converted into heat by
means of a braking resistor.
The design variant described here is a low­cost option for braking drives with
low masses without additional effort
The integrated braking resistor also has the major advantage that no addi­
tional space for an external braking resistor is required.
However, the braking power is limited for thermal reasons. You will find the
technical data for size 1 in chapter
12.2 Supply module size 1 and for size 2
in chapter 12.3 Supply module size 2 .