Kaysun KEM-30 DNH3, Техническое руководство

Страница: 128 / 160

MCAC-ATSM-2017-08 Aqua Tempo Power Series (with LAK) air cooled scroll chiller unit (50Hz)
125
a Add sub-module: Select the existing wired controller address from the KJR Address , and select the
configured module group at the drop-down box of Module name , select the sub-module address in the
drop-down box of the configured Sub-module address , and then click “Add”. The sub-module would not
be configured, if the sub-module address without configured in this wired controller; if sub-module is exists, a
message box would pop up as Fig. 4-26 to note you, the sub-module cannot be configured. If the
sub-module quantity exceeds than the maximum module under connect with wired controller, the message
box as Fig. 4-27 will pop up.
b Delete sub-module: Select the sub-module which wanted to delete (select the wanted delete sub-module
at the drop-down box of
Sub-module address ), and click Delete to finish this operation.
3 Schedule management includes: Weekly timing setting and Error record See Fig. 4-28
Click Weekly timing set a window as Fig. 4-29 would pop up finish the weekly schedule
management setting, each wired controller represents a refrigeration system; and the existing wired
controller is a wired controller has already been configured in the system.
Wired controller icons
(1 Gray color represents Weekly Timing without set in this wired controller.
2 Light green represents at less one Weekly Timing schedule has been set in this wired controller, without
schedule in activating.
Fig.4-25
Fig.4-26
Fig.4-27
Fig.4-28