Kaysun KEM-30 DNH3, Техническое руководство

Страница: 117 / 160

Query water temperature setting: press the or key under
the main page to query the set water temperature numerical value.
2) Timing setting: can set 3 timing periods on the wire controller: Timer
1, Timer 2, Timer 3, and then control the main unit to ON and OFF in
different periods. Setting method: press “Setting” key under main page
twice to enter timing setting. At that time the LCD will display as the
following:
This time the hour of the clock will flash, it means the current setting is the hour of Timer 1 On , press the
or to adjust, press key when finished, and then the minute of the clock will flash, it means
the current setting is the minute of Timer 1 On , press the or to adjust, press key
when finished, the LCD will display as the following:
This time the hour of the clock will flash, it means the current setting is the hour of Timer 1 Off , press the
or to adjust, press key when finished, and then the minute of the clock will flash, it means
the current setting is the minute of Timing 1 Off , press the or to adjust, press key
when finished, the LCD will display as the following:
At this time the hour of the clock will flash, it means the current setting is the hour of the Timer 2 “On”, and
the follow setting method will be the same of the Timer 1. Similarly, the setting of Timing 3 is the same with
this method. After setting, press “OK” key or wait for 7 seconds then the setting to be effective, and the LCD
will display the effective timing information, as the following display:
Example of Timing setting
TIMER
ON
TIMER
OFF
TIMER
ON
TIMER