KaVo INTRAsurg 300 Скачать руководство пользователя страница 9

Страница: 9 / 70

Safety

2.1

Description of safety instructions

2.1.1

Warning symbol

2.1.2

Structure

DANGER

The introduction describes the type and source of the danger.

This section illustrates the potential consequences of non-observance.

▶ The optional step covers necessary measures for avoiding hazards.

2.1.3

Description of danger levels

Safety instructions with three hazard levels are used in this document for avoiding

personal and property damage.

CAUTION

indicates a hazardous situation that can cause damage to property, or mild or

moderate physical harm.

WARNING

indicates a hazardous situation that can cause death or serious injury.

DANGER

indicates the maximum hazard level. indicates a hazardous situation that can di‐

rectly cause death or serious injury.

2.2

Purpose – Proper use

Note
Only the INTRAsurg 300plus with the IPX8 foot switch is permitted for use in op‐

erating rooms.

The ambient temperature must lie b10℃ and +35℃.

The relative humidity must be between 30% and 75%.

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
2 Safety | 2.1 Description of safety instructions

7/66

Содержание INTRAsurg 300







































































Результаты поиска

Содержание INTRAsurg 300

Отзывы:

Похожие инструкции для INTRAsurg 300

Бренды по названию

Популярные бренды

KaVo INTRAsurg 300, Инструкция по эксплуатации

Результаты поиска

Содержание INTRAsurg 300

Отзывы:

Похожие инструкции для INTRAsurg 300

Бренды по названию

Популярные бренды