KaVo INTRAsurg 300 Скачать руководство пользователя страница 6

Страница: 6 / 70

The warranty does not usually cover bulbs, glassware, rubber parts and the colour‐

fastness of plastics.

Defects or their consequences that can be attributed to interventions on or changes

made to the product by the customer or a third party are excluded from the warranty.

Claims from this warranty can only be asserted when the transfer form (copy) be‐

longing to the product has been sent to KaVo, and the original can be presented by

the operator or user.

1.5

Transportation and storage

1.5.1

Currently valid packaging regulations

Note
Only valid for the Federal Republic of Germany.

Properly dispose of and recycle the sales packaging, in accordance with the relevant

packaging regulations, through waste management businesses or recycling com‐

panies that run a comprehensive return system. KaVo has licensed its sales pack‐

aging in accordance with this directive. Please conform with the regional, public

waste-disposal system regulations.

1.5.2

Damage in transit

In Germany

If the packaging is visibly damaged on delivery, please proceed as follows:

1. The recipient of the package must record the loss or damage on the delivery

receipt. The recipient and the representative of the shipping company must sign

this delivery receipt.

2. Leave the product and packaging in the condition in which you received it.

3. Do not use the product.

4. Report the damage to the shipping company.

5. Report the damage to KaVo.

6. You must contact KaVo before returning a damaged product.

7. Send the signed delivery receipt to KaVo.

If the product is damaged but there was no discernable damage to the packaging

upon delivery, proceed as follows:

1. Report the damage to the shipping company immediately and no later than 7

days after delivery.

2. Report the damage to KaVo.

3. Leave the product and packaging in the condition in which you received it.

4. Do not use a damaged product.

Note
Failure on the part of the recipient to comply with any of the above obligations will

mean that the damage will be considered to have arisen following delivery (in

accordance with ADSp. Art. 28).

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
1 User instructions | 1.5 Transportation and storage

4/66

Содержание INTRAsurg 300







































































Результаты поиска

Содержание INTRAsurg 300

Отзывы:

Похожие инструкции для INTRAsurg 300

Бренды по названию

Популярные бренды

KaVo INTRAsurg 300, Инструкция по эксплуатации

Результаты поиска

Содержание INTRAsurg 300

Отзывы:

Похожие инструкции для INTRAsurg 300

Бренды по названию

Популярные бренды