KaVo INTRAsurg 300, Инструкция по эксплуатации

Страница: 20 / 70

4 First use
4.1 Electrical connection
CAUTION
Damaged network cable/missing protective conductor.
Electrical shock.
▶ Check the network cable before use. The socket outlet must have a protective
contact and meet the respective national guidelines.
▶ Always completely inset the power cable into the device's socket to connect to
the mains.
Both lines L and N are individually fused with T 3.15 H. The network frequency can
be 50 or 60 Hz.
Requirement
Make sure that the supply voltage is correct.
▶ First plug the inlet connector for non-heating apparatuses into the device, and
then plug the other end of the line into a socket.
See also: 4.3 Adjust the mains input voltage, Page 19
Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
4 First use | 4.1 Electrical connection
18/66