KaVo INTRAsurg 300 Скачать руководство пользователя страница 13

Страница: 13 / 70

International (EU)

For country-specific information on disposal, contact your dental supplier.

2.3

Safety instructions

CAUTION

Electrical sparks in the product

Explosion.

▶ Do not use product in areas subject an explosion hazard.

CAUTION

Damaged network cable/missing protective conductor.

Electrical shock.

▶ Check the network cable before use. The socket outlet must have a protective

contact and meet the respective national guidelines.

▶ Always completely inset the power cable into the device's socket to connect to

the mains.

CAUTION

Damage due to liquids

Faults on electric components.

▶ Protect product openings from penetration of liquids.

▶ Remove liquids from the inside of the device.

CAUTION

Unintended penetration of liquids.

Electrical shock.

▶ Do not immerse the product in a tub-like container.
▶ Check and make sure that the coolant containers and lines do not leak before

each use. If liquid is found on the device, do not touch it and disconnect the

power cable from the mains. Completely dry the surface of the unit before re‐

inserting the power cable.

CAUTION

Damage to the instrument hoses from stickers.

Instrument hoses can explode.

▶ Do not affix stickers or adhesive tape.

CAUTION

Rotating parts while the pump is operating

Injury

▶ Do not stick anything in the pump. Turn off the device when the pump is open.

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
2 Safety | 2.3 Safety instructions

11/66

Содержание INTRAsurg 300







































































Результаты поиска

Содержание INTRAsurg 300

Отзывы:

Похожие инструкции для INTRAsurg 300

Бренды по названию

Популярные бренды

KaVo INTRAsurg 300, Инструкция по эксплуатации

Результаты поиска

Содержание INTRAsurg 300

Отзывы:

Похожие инструкции для INTRAsurg 300

Бренды по названию

Популярные бренды