Set before and after the four joint E/F/G/H segments fixed
seam is similar, but the ten tuning parameters for 11D
parameters.
Note: the shortcut keys out of 11C parameters for press
6
and
key; shortcut key 11D parameters for press
and
key.
4.7 H-43 operating panel piece number function
1
P
The first step, press
key, then press
key, the LCD
screen will be prompted to enter the password technician
P
parameters, then press
key to enter the technician mode;
2
The second step, adjusted to 154 parameters, input the piece
number, for example the set alarm number for 100;
3
The third step, select the required piece number mode,
transferred to the 155 parameters, can be set to 3, including the
number of needle after press the reset key to cancel the alarm
P
to count; then press
key save and exit.
4
The fourth step, open the count needle number monitoring
P
function, press
key, then press
key to enter the
monitor mode.
37
