KATflow 100
1 Safety instructions, legal requirements,warranty, return policy
1.3 Warranty
●
Any product purchased from KATRONIC is warranted in accordance with
the relevant product documentation and as specified in the sales contract
provided it has been used for the purpose for which it has been designed
and operated as outlined in these operating instructions. Misuse of the
equipment will immediately revoke any warranty given or implied.
●
Responsibility for suitability and intended use of this ultrasonic flowmeter
rests solely with the user. Improper installation and operation of the
flowmeter may lead to a loss of warranty.
●
Please note that there are no operator-serviceable parts inside the
equipment. Any unauthorised interference with the product will invalidate
the warranty.
1.4 Return policy
If the unit has been diagnosed to be faulty, it can be returned to KATRONIC for
repair using the Customer Returns Note (CRN) attached to the Appendix of this
manual. KATRONIC regret that for Health & Safety reasons we cannot accept the
return of the equipment unless accompanied by the completed CRN.
1.5 Legislative requirements
The flowmeter is designed to meet the safety requirements in accordance with
sound engineering practice. It has been tested and has left the factory in a
condition in which it is safe to operate. The equipment is in conformity with the
statutory requirements of the EC directive and complies with applicable regulations
and standards for electrical safety EN 61010 and electromagnetic compatibility EN
61326. A CE Declaration of Conformity has been issued in that respect, a copy of
which can be found in the Appendix of these operating instructions.
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) aims to
minimise the impact of electrical and electronic goods on the environment by
increasing re-use and recycling and by reducing the amount of WEEE going to
landfill. It seeks to achieve this by making producers responsible for financing the
collection, treatment, and recovery of waste electrical equipment, and by obliging
distributors to allow consumers to return their waste equipment free of charge.
KATRONIC offers its customers the possibility of returning unused and obsolete
equipment for correct disposal and recycling. The Dustbin Symbol indicates that
when the last user wishes to discard this product, it must be sent to appropriate
facilities for recovery and recycling. By not discarding this product along with other
household-type waste, the volume of waste sent to incinerators or landfills will be
reduced and natural resources will be conserved. Please use the Customer
Return Note (CRN) in the Appendix for return to KATRONIC.
All products manufactured by KATRONIC are compliant with the relevant aspects
of the RoHS Directive.
6
RoHS Directive
CE marking
WEEE Directive
