KATflow 100
3 Installation
●
Pull the tension strap and guide the free end through the clamp so that the
clamp hooks engage. Slightly tighten the screw on the clamp.
●
Mount the second sensor in the same way.
●
Press the sensors firmly to the pipe. There should be no air pockets
between the transducer surface and the pipe wall.
●
Using a measuring tape, adjust the sensor separation distance as
suggested by the flowmeter. When the sensor positioning screen (Section
3.3) is displayed, the middle bar allows fine adjustment of the sensor
location.
19
Illustration 8: Sensor mounting with tension straps and clamps
