KATflow 100
5 Commissioning
Low memory
Logger space remaining at low memory alarm
Log Wrap
Saves "selected" items as a continuous stream
without headers (Note : this means files cannot be
processed by )
Yes/No
Log Download
Send logger data using communication port
Log Erase
Erase data on logger (clear logger)
Serial Comms
[where specified]
Mode
Select from list ↑↓
None, Printer (continuous 1s output), Diagnostic,
Download (logger), Calibration test (factory)
Baud
Select from list ↑↓
9600, 19200, 57600, 115200
Parity
Select from list ↑↓
None, Even, Odd
Type
RS232, RS485, etc. (as installed)
5.2 Diagnostics [where specified]
Diagnostic screens, where specified, can be viewed directly during measurement
using the programmer or through the menu structure (screen only).
5.3 Display settings
The main Process Value (PV) is the primary measurement data. Customer specific
settings for data to be displayed can be set in the appropriate menu items. The PV
can be selected from a list of available items.
5.3.1 Main PV
The main Process Value (PV) is the primary measurement data, and is usually
displayed as the Middle Units.
33
+
Table 6: Firmware menu structure
+