27 of 40
The antenna cable is causing a short cir-
cuit
Check the antenna cable and replace it, if
necessary
internal fault
1. Turn off the receiver and unplug the
antenna cable.
2. Wait about 30 seconds.
3. Connect the antenna cable and turn
on the receiver.
4. Check the satellite system if the mes-
sage is displayed again.
5. If necessary, consult an antenna spe-
cialist.
Several or all channels are not shown
Possible Causes
Remedy
The tuner is set incorrectly
●
Check antenna settings (
Menu
▶
Instal-
lation
▶
Antenna Setting
)
●
If necessary, consult an antenna spe-
cialist
There is a channel outage
Make sure there is no outage in your area
The receiver is not responding to the remote control
Possible Causes
Remedy
The batteries of the remote control are ...
flat,
of the wrong type,
have been inserted the wrong way round.
The batteries must be ...
replaced,
replaced,
inserted the right way round; see
Fig. 4
, p. 14.
The remote control is not directly pointed
at the receiver
Point the remote control directly at the
receiver
