Initial set-up
18 of 40
7
Initial set-up
ATTENTION
Material damage due to improper cable connection!
►
Only connect the unit to the mains and perform the initial set-up after the
installation work has been properly carried out as described in the previous
chapters.
Tip
Nothing you do during the initial set-up can damage your reception system. Ask
your specialist dealer if you have questions or encounter problems.
7.1
Remote control
For the initial set-up you will need to use the following buttons on the remote control:
navigate in the menu and in lists
●
navigate in the menu and lists
●
select functions
●
change settings
●
shows a channel list
●
calls up a submenu
●
confirms settings
Red
button
takes one step back
MENU
shows the menu
BACK
leaves the
Installation Guide
Blue
button
●
confirms settings
●
goes to the next page
