Inserting batteries into the remote control
14 of 40
5
Inserting batteries into the remote control
1. Remove the cover from the remote control. To do this, press on the point
②
and push
the cover
①
off to the rear
③
(
Fig. 4
).
2. Insert the batteries supplied
④
into the battery compartment
⑤
. Ensure correct polar-
ity of the batteries (the polarity is marked inside the battery compartment).
3. Fit the cover again and slide it forward to the stop.
4
3
2
1
4
5
Fig. 4: Inserting batteries into the remote control (showing the principle)
6
Connecting the receiver
6.1
Requirements
This Quick Start Guide describes how to connect and commission
single systems
of type
DiSEqC™1.0
or
simple LNB
for the satellites Astra 19.2° East and Hotbird 13° East.
For more information, see the UFS 933 comprehensive instructions for use at
www.kathrein.com
. Contact your specialist dealer directly if you have questions or
encounter problems.
