Initial set-up
22 of 40
7. Enter the preset password 0000.
➯
The changes are saved and the
chosen channel is locked – no pic-
ture is displayed (see figure on the
left).
8. To show the locked channel at a later
date, enter the password 0000.
➯
The channel is shown.
Adjusting the antenna system
You need to change the antenna settings only if your antenna system is not a single-
device system of the type
DiSEqC™1.0
or a
simple LNB
.
►
Set the antenna system of the single-cable system type as described in
Setting the
single-cable system
, p. 23
.
►
Adjust the antenna settings under
Menu
▶
Installation
▶
Antenna Setting
.
