Initial set-up
24 of 40
3. Press
and then
a number of
times to go to the setting value
Unicable
(set to
OFF,
see figure on the left).
A
4. Press
OK
.
➯
The entry mask
Ⓐ
appears (see
figure on the left).
5. Press
to go to the setting value
Frequency
.
6. Enter the frequency value
1)
using the
number pad (example on the left:
1284
MHz).
7. Press
to go to the
SatCR
setting value
(transmission channel).
8. Select a transmission channel
1)
using the
buttons
(example on the left:
0
).
9. Press
OK
.
➯
A system message appears for sev-
eral seconds (see figure on the left).
10. Press
Menu
.
➯
A TV channel is shown.
1)
For more information, see the documentation of the single-cable multi-switch.
