Connecting the receiver
16 of 40
6.2
Selecting the installation site
ATTENTION
Material damage due to improper installation site!
Follow the following instructions to avoid material damage:
►
Maintain at least the following clearance around the unit: 10 cm above, 5 cm
behind, 2 cm to either side.
►
Never install the unit in a cupboard or on shelves with inadequate ventila-
tion.
►
Do not install the unit close to the sources of heat.
►
Do not expose the unit to direct sunlight.
►
Install the unit close to an easily accessible mains socket to be able to dis-
connect the unit from the mains at any time.
►
Do not place any heavy objects on the receiver, e.g. TV.
6.3
Connecting the antenna cable
✔
A sufficiently long antenna cable with F screw-on connectors is available (
Fig. 7
)
.
Fig. 7: F screw-type connector
1. Connect the coaxial cable of the LNB to the tuner input
LNB IN
. Tighten the cable only
hand-tight.
2. Using the antenna cable, connect the tuner input
LNB IN
to a Sat socket (
①
,
②
,
③
in
Fig. 8
)
:
a) Insert the F screw-on connector
centrally into
LNB IN
and push it in to the stop.
b) Tighten the union nut on the F screw-type connector.
